Fix Xiaomi Redmi 3 Camera Fails Or Damaged Camera

Share way to repair solutions Xiaomi Redmi 3 camera fails or damaged camera, usually will appear message notification on the screen(can't connect camera)
Share it:

 Xiaomi Redmi 3 Camera Fails Or Damaged Camera
On and this article Mobilintec Team will share repair solutions Xiaomi Redmi 3 camera fails or damaged camera.

Usually will appear message notification on the screen Xiaomi Redmi 3 (problematic camera can not connect to the camera) When we want to open the camera.

For repair solutions of the Xiaomi Redmi 3 camera fails, the camera is broken, the camera can not be open than will be done 3 steps to solve the problem.

Steps to repair the damage Xiaomi Redmi 3 camera fails, damaged camera or camera can not be open:

1. PERFORM A CHECK ON THE CAMERA DEVICE

Fix Xiaomi Redmi 3 Camera Fails Or Damaged Camera
For the first step try to uninstall Xiaomi Redmi 3 phone, then try to check the front and rear camera hardware. Clean the camera socket by using liquid alcohol so that the socket condition is back to normal, it could be this is what causes the phone Xiaomi Redmi 3 camera damaged.

2. REINSTALL THE PHONE XIAOMI REDMI 3


Reinstall the phone Xiaomi Redmi 3 camera not open
For the next step, you can re-install on your Xiaomi Redmi 3 mobile phone. If after you clean the camera socket but the result will still fail when the camera is open.

Reinstallation is very effective to overcome the damage of the system on a cell phone. Which could be the cause of a damaged camera or failed camera on the Xiaomi Redmi 3 phone caused by an error system.
Read Also: Flashing Xiaomi Redmi 3 To Solve Bootloop, Hard brick And Unlock Micloud

3. PERFORM VOLTAGE AND COMPONENT CHECKS


Fix Xiaomi Redmi 3 Camera Fails Or Damaged Camera
In the diagram picture shown in the normal voltage of the component should be about 2.8 volts DC. Try to do a check on the components marked according to the diagram image.

If one of the components indicates an inappropriate voltage, then it can do the path jumper so that the component gets the voltage 2.8 volt DC back.

Hopefully with this information can be useful to you all, thanks.

Share it:

Damaged Camera

Mobile phone Repair

Xiaomi Android

Post A Comment:

1 comments:

  1. thanks for information, with this way my problem camera phone done.

    ReplyDelete