Skip to content Skip to sidebar Skip to footer

Fix Power Button Xiaomi Redmi Note 5A Not Work

Fix Power Button Xiaomi Redmi Note 5A Not Work - The frequent damage encountered in some Android phones especially on the Xiaomi Redmi Note 5a which is with the power button on-off that does not work, the cause of this damage can be many factors.

Some factors cause damage to the power button on-off the Xiaomi Redmi Note 5A can be caused by corrosion or rust contained in the power button, or it can also happen to wear on the button plate on-off so as to perform its function you must Press harder on the button.

Some damage signs on the power button on-off phones include

  • The phone cannot be turned on at all.
  • Your phone is hard to turn on, you need to press stronger keys to work.
  • The phone is experiencing continuous restart.

The solution of the Damage Repair power button on-off Xiaomi Redmi Note 5a is not working


Fix Power Button Xiaomi Redmi Note 5A Not Work
Try to make changes to the button plate on-off, this is often the main problem causing this damage, why can it happen? This results in corrosion in the button plate, making the power key's connectivity disrupted.

You can pick up the button plate from the keypad button that belongs to the Nokia phone. By doing this, hopefully, it is crucial that the power button on-off can be solved.


Fix Power Button Xiaomi Redmi Note 5A Not Work
The following steps can try to change the flexible Power key button on the phone Xiaomi Redmi Note 5. The damage to the flexible on-off button can cause your phone to be continuous, or completely unswitched.
Read Also: How To Fix Xiaomi Redmi 5A Headset Logo Mode

If the switch plate change and flexible switching of the power button have been done. Then the following steps can do a check on the internal components of the phone Xiaomi Redmi Note 5a.

For the checkpoint steps on the internal components and paths, you can see the diagram image shown below:

Fix Power Button Xiaomi Redmi Note 5A Not Work
Check and carefully any connected lines each component, take measurements using a multimeter. If you encounter a disconnected path on the PCB board Xiaomi's phone, Do apply the way jumper.

After that, try checking the diode component as well as the resistor seen in the diagram image, if there is damage to one of the components then immediately turn with the same value component.

Indeed the malfunction of the power button on-off is very annoying because the phone is difficult to operate, perhaps with a tutorial on how to repair the power button on-off Xiaomi Redmi Note 5a that does not work, can help solve the problems you have on your phone.

Additional notes: Always check and repair your phone carefully to avoid the risks of increasing damage, as this will be detrimental to yourself. Thanks.