Samsung Galaxy J1 Ringer Problem Way Jumper Solution

Samsung Galaxy J1 SM-J100ML Ringer Problem - The damage that occurs on a Samsung Galaxy J1 phone that has problems with speakers that do not produce sound or ringing, can cause the difficulty of doing activities using The phones Samsung Galaxy.

Ring speaker is a part that is able to produce sound on the phone, while we are making phone calls, playing videos, listening to music, playing games, listening to the results of sound recordings, and others.

Why can the speaker malfunction occur on a Samsung Galaxy J1 SM-J100ML phone?

Damage can occur in leaves some factors include damage to speaker parts, damage to the internal components of the phone, or there could be damage to the disconnected path on the Samsung Galaxy J1 PCB board.

To repair the damage Samsung Galaxy J1 SM-J100ML Ringer Problem speakers with a jumper way


1. CHECK THE SPEAKER PART RINGER 

For the first step can do a check on the speaker part of the Samsung Galaxy J1 SM-J100ML smartphone. Take measurements by using the Multimeter device on the ring speaker, when the measurement results indicate that the ring speaker is damaged.

Replace with the new part immediately, this can be one of the ringing speaker triggers that do not produce sound.

2. INSPECT THE COMPONENT AND APPLY THE WAY JUMPER

Repair Samsung Galaxy J1 Ringer Problem Way Jumper Solution
For corrective steps in this way, can be done in accordance with the diagram image listed, check all the components that are in the Ring Speaker section path, take measurements, if found defective parts immediately replace with new components Same value.

And also perform checks on the path, ring speakers, if there are found damaged and disconnected paths due to rust and water corrosion, then it can be done with the way jumper so that the ring speaker path condition is back to normal.
Read Also: Fix Samsung Galaxy J1 Ace SM-J110G Fake Charging

3. REPLACE AUDIO IC

If after checking the speaker part of the ringer, components, and paths but the conditions are in good condition. Most likely there is damage to the audio IC, audio Ic is a chip component that generates sound ringing speaker.
You can do audio IC switching on a Samsung Galaxy J1 to fix the speaker ringer's not working malfunction.

To make a component substitution, line jumper, or audio IC switching please do so carefully.

Such information and repair solution mobile phone Samsung Galaxy J1 SM-J100ML speaker ringer problem. Hopefully, this information can be useful for all of you, thanks.

0 Response to "Samsung Galaxy J1 Ringer Problem Way Jumper Solution"

Post a comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel