Skip to content Skip to sidebar Skip to footer

How To Choosing The Right Electrical Conduits

How To Choosing The Right Electrical Conduits

Choosing The Right Electrical Conduits - The modern world runs on electricity. Whether you're designing a home, office, factory, or any other type of commercial facility, you need to make sure that power reaches every corner imaginable. To ensure that there is electricity at the service point, electrical wiring will be laid. Since these wires could not pass through the building, empty conduits were installed through which they were routed to the tap points.

These wires can either be routed within the wall or laid on the surface of the wall. Secondary purposes of conduit include maintaining the aesthetics of the building, holding electrical wiring in place, and protecting electrical wiring from external hazards, mechanical stress, or thermal stress. The amount and type of conduit you need depend on the weight and size of the cable.

What is Electrical Conduit?

Electrical conduits are simply the components needed to help maintain and protect the wires within an electrical system. Conduit helps provide fire safety and mitigation planning, which is critical when placing electrical systems, in addition to keeping wiring organized and preventing anything that could break or destroy connections.

Advantages of Electrical Conduits

There are several ways to save money that don't require conduits, such as attaching the wires to the frame so they don't get in the way. These solutions are inexpensive but lack the protection benefits of wires.

In addition to impact and fire protection, cable ducts provide protection against moisture or chemical vapors. Moisture is the enemy of electricity and can cause short circuits or wrong wiring. Although cabled or spliced ​​wires also require insulation, conduit provides them with an extra layer of safety.

For some electronic equipment or power connections, the metal conduit has important benefits, and it can also provide electromagnetic interference shielding. Pipes with the correct fittings provide additional fire protection by preventing the passage of harmful gases and vapors.

Conduit makes it easier to store and install cables so they are not scattered throughout the job site, increasing the potential risk of cable damage. This applies to structures that may require future repairs or structural modifications, as well as during routine building installations. The smooth surface of the conduit makes sliding the wires in and out of place much easier than with fishing line tape or other methods of locating and routing the wires.

Project-specific wiring locations and dimensions can be extended, even underground, by using specific conduits, the right cables, and concrete structures.

Conduit is available in a variety of designs and sizes to accommodate different wire types, installation locations, and installation functions. Only bend limitations need to be considered when installing conduit, as it can only bend 360 degrees in one segment without the use of special electrical fittings.

Which Electrical Conduit Should I Use?

There are many different conduits out there, so you need to know which one best suits your needs. Will it be placed indoors or outdoors? Is it visible or hidden from the public? Are there special requirements? Here's a quick guide to help you.

PVC Conduit

Is usually a good choice, especially considering its affordability and how well it protects against water that might seep into the walls. Wires may need to be routed underground or in open areas exposed to air, dust, and water. PVC hoses are also used in these cases.

Electrical Metal Conduit

Is ideal for basement or garage applications where cables often run through wall surfaces. Metal pipes will provide important protection for rats in the basement. You may need to use pipe benders, fittings, offset fittings, and elbows to pass these metal pipes through bends. These metal tubes for electrical wires can be made of steel or aluminum. Aluminum pipes are an excellent choice for commercial or industrial applications in wet or humid climates because aluminum does not corrode.

Liquid-tight Flexible Non-metallic Conduit

LFNC-B is a cable conduit with a smooth PVC inner surface and reinforcements integrated into the conduit wall. It is a liquid-tight, flexible, non-metallic conduit. Flame Retardant Liquid Tight Flexible Non-Metallic Conduit (LNFC) is designed for use in wet, dry or greasy environments. They can be used in indoor or outdoor, commercial or industrial settings. These can be used in HVAC systems, swimming pools, and spas.

Liquid-tight Flexible Metal Conduit

As the name suggests, liquid-tight flexible metal hoses are better for situations where there is a lot of moisture. These are best suited for petrochemical plants, bridges, paper mills, and water treatment plants. A waterproof plastic cover is placed over a liquid-tight flexible metal tube.

Do I have to use PVC plastic conduit or metal conduit?

I often hear people ask, "Should I buy a metal Conduit or a PVC Conduit?" There is no single solution. As I mentioned before, you need to understand what is most useful in a given situation.

The decision between EMT and PVC pipe depends on whether you place it between the ceiling and wall panels, or use it under a concrete wall or floor surface.

Also, PVC pipes are prohibited in some cases. In these cases, your only option is to use steel or aluminum tubing to secure the installation.

It's important to know when to use conduit for wires and when not to. So, you can choose the funding for your project wisely. If you're wondering why an electrical system needs a conduit, the answer is when wires can be damaged or exposed.

The alternatives I gave above for choosing the best electrical conduit will certainly do the job required. Understanding your needs will help you make an informed choice of catheter type.